Jmeter模拟不同带宽进行测试
Jmeter自带模拟带宽设置，前提是当前的带宽>=要模拟的带宽，如：当前4m的宽带，只能模拟4m及以下的带宽；
设置方法：在user.properties文件，增加如下配置：
# Define characters per second > 0 to emulate slow connectionshttpclient.socket.http.cps=49152httpclient.socket.https.cps=49152
以上，是定义了一个Mobile data EDGE : 384 kbit/s的带宽；
计算cps公式
cps = (target bandwidth in kbps * 1024) / 8
Some examples:
Network bandwidth | cps value |
Mobile data GPRS : 171 kbit/s | 21888 |
Mobile data EDGE : 384 kbit/s | 49152 |
Mobile data HSPA : 14,4 Mbp/s | 1843200 |
Mobile data HSPA+ : 21 Mbp/s | 2688000 |
Mobile data DC-HSPA+ : 42 Mbps | 5376000 |
Mobile data LTE : 150 Mbp/s | 19200000 |
WIFI 802.11a/g : 54 Mbit/s | 6912000 |
WIFI 802.11n : 600 Mbit/s | 76800000 |
Ethernet LAN ; 10 Mbit/s | 1280000 |
Fast Ethernet : 100 Mbit/s | 12800000 |
Gigabit Ethernet : 1 Gbit/s | 128000000 |
10 Gigabit Ethernet : 10 Gbit/s | 1280000000 |
100 Gigabit Ethernet : 100 Gbit/s | 12800000000 |
WAN modems V.92 modems : 56 kbit/s | 7168 |
ADSL : 8 Mbit/s | 1024000 |
ADSL2 : 12 Mbit/s | 1536000 |
ADSL2+ : 24 Mbit/s | 3072000 |
Configuration summary:
Ensure you use HttpClient 3.1 or HttpClient 4 implementations
Configure bandwidth by defining the 2 properties above in
/bin/user.properties